Model MB76E
 |
This version of generating machine MB76 is suitable for marking of vertically positioned round components, rings, etc. up to 1000 mm diameter with any text strings or special symbols. The pneumatic model (EP) has a vertical movement of 22 mm. The maximum length of text is 180 mm and can be of one or more lines. Deeper marking can be achieved by repeating the same marking cycle several times. The part to be marked is pressed against the typeholder using spring washers. Loading and unloading are carrried out manually. The machine is operated by using safety control panel. Large range of accessories: linear typeholders (8.) and types(7.1).
Machine is available in three versions:
|
Model MB76E90° and MB76EP90°
  |
These generating (rolling) machines will mark horizontally placed round parts and flanges up to 650 mm diameter. The maximum length of text must not exceed 180 mm, but can be one or more lines. Deeper marking can be achieved by repeating the same marking cycle several times. The part to be marked is pressed against the typeholder using spring washers. Loading and unloading are carrried out manually. The machine is operated by using safety control panel. Large range of accessories: linear typeholders and types.
Machine is available in two versions:
Pneumatic model (EP) has an approach stroke of 22 mm (to feed forward the part to the marking head). |